Trusted Tips and Resources

Trusted Tips & Resources

Trusted Saskatoon Auto Repair Pro's at Phobia Auto Explain Why They Don't Allow Customers to Supply Parts

Trusted Saskatoon Auto Repair & Service Experts at Phobia Auto are based in Martensville and they are a trusted source for honest advice and qualified auto service and repairs. People ask all the time why you can't supply your own parts when they come into Phobia Auto. If you are wondering why Phobia Auto answer the question in the tip below. Phobia Auto Are Trusted Saskatoon & area Auto Repair & Service Specialists. 


Phobia Auto Will Not Allow Customers to Supply Parts


Reason # 1: Warranty

The main reason is the warranty. Phobia Auto offers at the 1-year part and labour warranty on almost everything they install (depending on the manufacturer or if it says a used major component.) 




Reason # 2: Who Takes the Blame



Warranty can be a sticky situation. Let’s say a customer supplies a power steering pump they bought online. They install it and it’s a faulty pump (this is a real word thing). The customer is now on the hook for taking the part off and putting another on. Paying the labour twice. Phobia pays insurance on every part that comes through the door to allow them to eat these labour costs in a situation like this. 


Reason # 3: Auto Repair Shops Get Discounted Parts


Also, don’t forget that they get thousands of dollars worth of parts from the local jobbers. They should be entitled to get the parts a few dollars cheaper than the customer that buys a set of pads and a water pump every two years. So yes, they make money on parts. They must! Shop owners have a responsibility to pay their techs on time so that they can put food on the table while setting aside money for themselves as independent owners. Running a successful shop is very…..very expensive!




Reason # 4: Liability


The shop could be legally liable for failed parts. If they had installed a part that you had bought, and that part failed and caused an accident, Phobia Auto could be held legally liable. Why does that matter? Like many shop owners, Phobia Auto owners have poured their life savings into their businesses. The liability for installing a part you had purchased, in order to save a few bucks, isn’t worth that risk to a business owner’s personal and professional livelihoods. 



Reason # 5: Wrong Parts


Another issue we used to run into was wrong parts. Customers would be confident they had the right part they bought online. But they forgot to pay attention to if they had a 4x4 or a certain option that changed the part. Phobia Auto would have a dismantled vehicle on the hoist. Some customers would offer to get a new part from online but leaving them with a hoist tied up for days.




Contact Steve and the team today- check out their reviews and see all they do on their listing here : 
Phobia Auto A Trusted Saskatoon & area Auto Repair & Service Shop
Phobia Auto Are Your Trusted Saskatoon & Area Performance Vehicle Specialist 



Saskatoon Auto Repair and Service Pros at Glenwood Auto Tip on Starting Diesel Engines In Saskatchewan Winters

At Glenwood Auto Service, they believe that staying on top of regular maintenance keeps your vehicle running better for longer. Glenwood Auto Service,  Trusted Saskatoon Auto Repair and Service Experts, are ready to help you with all your Saskatoon auto maintenance and repairs. In their latest Saskatoon auto blog, they share tips on starting diesel engines in Saskatchewan winters.


Starting Diesel Engines In Saskatchewan Winters

Starting diesel engines during cold weather can be frustrating if engines are not properly prepared for lower temperatures. Batteries that are weak may not crank the starter motor fast enough or long enough to start a cold engine. As the temperature goes down, so does battery capacity. A battery that has all of its power available at 80 degrees F will have only about 46% available power at -20 degrees C. Plus, the engine will be 2.5 times harder to start at 0 degrees due to thicker oil and resistance to movement of internal moving parts. In effect, an engine is about five times harder to start at -20 degrees C than at 25 degrees C. Test weak or suspicious batteries under load before cold weather to help eliminate potential problems during busy times. If batteries need replacement, always replace with a battery equal to or more powerful than the original battery. Accessories such as radios, air conditioners, heaters and other high amperage devices put extra strain on batteries. Turn all of these devices off while the starter motor is in use.

Use glow plugs or block heaters on the engine for cold weather starts. Glow plugs heat the internal combustion chamber area to suitable temperatures for combustion. Otherwise, cold fuel sprayed into the chamber and onto the glow plugs can gel and adhere to these parts. Hard starting and inefficient combustion occur with the potential for damage to plugs and cylinder heads.
 
Use Number 1 diesel fuel in cold weather. It is more volatile than Number 2 fuel and ignites more readily under cold conditions. Keep the fuel tank full to prevent condensation inside the tank. Water from condensation can freeze and plug fuel lines from the tank to the engine. Add winter diesel fuel additive to the fuel to lower the possibility of gelling and improve starting.
 
Store tractors inside tool sheds, barns, garages or other suitable locations that are heated or warmer than outside temperatures. Only a few degrees warmer temperature can make starting faster and easier. The warmer the battery is, the more power it can provide to the starter motor to crank the engine. The warmer the engine oil is, the thinner it will be and have less resistance to moving engine parts. Make sure you are using the proper viscosity oil recommended for your engine for cold temperatures. If you cannot store engines inside or in a heated area, install a block heater on the engine. To save time and electricity, put the block heater on an electrical timer set to come on a couple of hours before you plan to start the engine.
 
If you suspect fuel has gelled from cold temperatures, change the fuel filter and warm the fuel (wait for the outside temperature to rise, use a block heater or put the tractor inside a heated area) before attempting to start the engine. Gelled fuel in the filter can block the flow of fuel from the tank to the injector pump.
 
After starting the engine on a cold day, allow the engine to warm up a few minutes before putting the tractor under load. Proper engine operation temperatures assure more efficient fuel combustion and may prevent damage to cold engine parts. Engine oil flows more readily at operating temperatures and allows proper lubrication of upper engine parts and areas.




Even the highest quality vehicles need regular maintenance. If you need maintenance or repairs, book an appointment with Glenwood Auto today!


Trusted Saskatoon Auto Repair and Service Experts Glenwood Auto Ways To Go Green With Your Car

At Glenwood Auto Service, they believe that staying on top of regular maintenance keeps your vehicle running better for longer. Glenwood Auto Service,  Trusted Saskatoon Auto Repair and Service Experts, are ready to help you with all your Saskatoon auto maintenance and repairs. In their latest Saskatoon auto blog, they share four easy ways to go green with your car.

GO GREEN WITH YOUR CAR

Looking for ways to become more environmentally friendly? Motorists can do their bit to help protect the environment by following these four simple steps.

  1. Follow a vehicle service schedule including steps like checking engine performance, keeping tires properly inflated, replacing air filters regularly, changing oil regularly and checking your gas cap. Routine maintenance helps reduce emissions and fuel consumption, saving money at the pump.
  1. Keep your current vehicle longer and limit the number of new cars you buy over the course of a lifetime. Extending vehicle life is as simple as taking care of your vehicle properly. You’ll gain years of reliable service without monthly car payments and higher insurance rates.Recycle oil MM
  1. Recycle or properly dispose of motor oil, tires, batteries, fluids and other vehicle components to help protect the planet when performing vehicle maintenance or repairs.
  1. Repower your engine when faced with serious engine trouble. A remanufactured/rebuilt engine can give your vehicle new life and make it more fuel efficient for about the cost of an average down payment on a new car.

“Being car care aware and performing basic vehicle maintenance goes a long way toward protecting the environment and improving fuel economy

Glenwood Auto is a Trusted Saskatoon Auto Repair and Service Shop



Even the highest quality vehicles need regular maintenance. If you need maintenance or repairs, book an appointment with Glenwood Auto today!


Saskatoon Auto Repair and Service Experts Glenwood Auto Share 10 Driving Tips

At Glenwood Auto Service, they believe that staying on top of regular maintenance keeps your vehicle running better for longer. Glenwood Auto Service,  Trusted Saskatoon Auto Repair and Service Experts, are ready to help you with all your Saskatoon auto maintenance and repairs. In their latest Saskatoon auto blog, they share 10 driving tips to help your vehicle last longer. 

 

GLENWOOD AUTO SHARES 10 DRIVING TIPS TO HELP YOUR VEHICLE LAST LONGER

Have you ever noticed some older vehicles look new while other ones of the same age are falling apart? While maintenance has something to do with it, daily driving habits also have a huge influence.

Staying on top of regular maintenance keeps your vehicle running better for longer. Glenwood Auto are Trusted Saskatoon Auto Repair Experts, and they are ready to help you with all your maintenance needs. In their latest article, they share ten daily driving tips to help you keep your car in good shape and save money maintenance-wise at the same time.

1. Avoid potholes

This may seem like a no-brainer, but it is still surprising the number of people I see drive right through potholes even though there is plenty of space to go around them. These, when deep, can not only damage the tire and the wheel, but the impact can also have adverse effects on the suspension and steering components. The whole car will benefit from avoiding or slowing down for potholes, as these repetitive impacts tend to loosen various items in the car, creating rattles and squeaks.

 2. Look down the road

It may seem to be another obvious point, but it is important to look down the road not only to see where you are going but also to spot what is on the road itself. You will want to avoid weird looking items on the road that may damage your tires or bounce against the underside of the car. It will also allow you to spot bumps or dips in the road, or at least slow down for them so the impact is not as harsh.

3. Slow down for train tracks

In the same line of thought as the two previous points, slow down for railroad tracks when coming up to a crossing, or when coming up to a bridge on small country roads. These are always uneven with the pavement and create impacts for the wheels, tires and overall car that can be damaging over time.

4. Do not follow trucks up close

You may not have the choice…Getting stuck behind a truck is unavoidable. But as the driver of your vehicle, you can choose how close you are following the said truck. Not only is it safer to leave a greater distance, but you will also be saving your car from flying rocks and other debris which, over time, damage the paint, damage your headlights and windshield. As a bonus, when following a badly maintained older truck, staying far means less black fumes get into the filter of your ventilation system.

Cars and trucks daily driving











5. Take it easy at first

Your car engine is made to run and move your car swiftly but is designed to do so when at operating temperatures. There is no need to idle the car for long, but take it easy for the first few kilometres while the engine goes up to its normal operating temperature. This will save you wear and tear as well as save some fuel; many engines are not as fuel-efficient when cold.


6. Smooth is key

Smoothness in your actions at the wheel is very important, not only for the stability of the car while moving but also for the durability of the vehicle’s components. For example, start braking slowly and a bit earlier than you normally do, so you don’t have to make panic stops all the time. The same applies to lane changes or merging into traffic. By going smoothly the various mechanical parts of the car will not take a hit but actually be able to work as intended, and thus last longer… Plus your passengers will enjoy the ride rather than being tossed around.

7. Floor it sometimes!

It may sound opposite to the previous advice, but your engine does need to be wound up and pushed at times. Wait until it is at proper operating temperatures and once in a while when merging onto highways, for example, step on the gas for swift acceleration. Getting the engine up in revs will allow it to work hard and burn some of the carbon deposit that tends to accumulate around the valve train. Doing this occasionally will help prevent having an engine head all gummed up or covered with carbon deposits.

8. Get to a full stop before reversing

How often do you, in a rush, throw the gear change lever into reverse (R) while the car is still moving? That is the best recipe for early transmission failure. Take the time to reach a full stop before shifting; this applies to any shifting action. Shifting before this full stop means the transmission needs to take the brunt of the momentum while shifting, which causes undue damage over time.

Make sure to also do so when shifting into park (P). Shifting into park on an automatic transmission means you are engaging a very small lever to lock a gear; that lever is not designed to stop the car and having to do so too often will result in premature failure.

9. Steer while rolling

Whenever possible, try to steer only when the car is in motion. Even when doing a parallel parking maneuver, get the car rolling slightly before turning the steering wheel. This will prevent too much effort being exerted on the steering rack and components, the major cause for steering rack failure. Turning the wheels while standing still puts tremendous stress on the whole steering system as it then has to fight with the tire and asphalt friction while the whole weight of the vehicle is on them.

Steering wheel














10. Plan errands in one round

As much as possible, try to plan all your errands of the day in one outing. There is nothing more damageable for an engine but to be run for only very short trips while being cold. In doing all errands at once, you reduce the time the engine is running cold and have more chances of having it stay to operating temperatures.

A little bit of caution and understanding of your vehicle by following these daily driving tips will help contribute to keeping your car in good shape. 

Glenwood Auto is a Trusted Saskatoon Auto Repair and Service Shop

 


Even the highest quality vehicles need regular maintenance. If you need maintenance or repairs, book an appointment with Glenwood Auto Service  today!


Crestview Auto Trusted Saskatoon Tire and Auto Repair expert shares a tip on Re-Torquing Tires

Let's face it, most of us do not think about the tires on our vehicles until we run into a problem....and that problem may be a major inconvenience at best; an accident at worst. Having your vehicle serviced by people that you trust is an absolute must. Let Don and the highly trained technicians at Crestview Auto Service work with you to make sure your vehicle is ready for the road.

Crestview Auto Service is Trusted Saskatoon Tire Expert and they also offer full Auto Service and Repair in Saskatoon

Don Klassen shares a tip on Re-Torquing Tires:

“Why do wheels need to be re-torqued?”

 

Re-torquing wheels after vehicle servicing

 
When you bring your vehicle to our repair shop, if we have had your wheels off of the vehicle, we will ask you to return so we can re-torque the wheels. Your invoice will also have a statement on it advising that the wheels need to be re-torqued. You can do this yourself if you like, but if we were the ones to work on the car we do this at no charge to you. We always use a torque wrench to tighten your wheels when we re-install them. This is more of a safety concern now than it was 20 years ago. Vehicles are much more reliable today, but they are made with lighter materials and some of these are very fussy about how they are put together. Even a slight decrease or increase in the tightness of bolts and nuts can have adverse affects, in that they can loosen or they can break.
 
 
Occasionally a customer will come into our auto repair shop with a concern of a noise; once in a while we find loose lug nuts that hold the tires and rims tight to the car. This usually happens shortly after they have had the vehicle in for servicing somewhere and the wheels were off or they have taken the wheel off themselves. Most automotive shops will use a torque wrench to tighten the wheel and this is the best way to make sure the nuts are tight but not so tight that the wheel studs break from too much pressure on them. Some vehicles are more prone to having the lug nuts loosen and will need multiple re-torquing to make sure they stay tight. 

 
 

Loose wheels don’t happen often, but to be safe, have your wheels re-torqued within the first 100 KM after they have been put on. It is the responsibility of the vehicle owner/driver that this is done. Loose wheels can cause a lot of damage to your car and potential injury to you and others. It doesn't take long to re-torque wheels and could save you a repair bill and a big headache.


Find Crestview at 24, 23rd Street East  or online at www.crestviewautoservice.ca - they are a fullservice Saskatoon Tire and Auto Repair & Service business and they can be found on the Saskatoon Directory under TIRES SASKATOON    and Auto Repair & Service Saskatoon they are your TRUSTED SASKATOON TIRE and AUTO REPAIR EXPERTS  

 

 

Categories

Previous Posts

ADDRESS

S & E Trusted Online Directories Inc
TrustedSaskatoon.com
129 21st St E #400
Saskatoon, SK   S7K 0B2
Ph: 306.244.4150

GET THE APP

App Store Google Play
Follow us on Facebook Linked In Twitter YouTube RSS Feed
Abex
Abex
Stevies
Sabex
NEYA
Website hosting by Insight Hosting