Perfection Plumbing & Drain Cleaning Ltd. is a premier provider of quality drain cleaning and plumbing services in Saskatoon, SK. They are the company of choice to handle all of your plumbing concerns including drain cleaning service, water heater installation, plumbing repair, and more. Perfection Plumbing is a Trusted Saskatoon Plumbers on the Saskatoon Directory. In their latest tip, they explain how to flush your water heater.
To flush your water heater, you will need to follow these steps:
- Turn off the power to the water heater. If your water heater is electric, you will need to switch off the circuit breaker or unplug it. If it is gas-powered, you will need to turn off the gas supply at the gas valve.
- Attach a hose to the drain valve at the bottom of the water heater. This valve is typically located on the side of the tank, and it is used for draining and flushing the tank.
- Place the other end of the hose in a floor drain or outside where the water can drain safely.
- Open the drain valve by turning the handle counterclockwise. Water and sediment will begin to flow out of the tank and through the hose.
- Allow the water to flow until it runs clear. This may take a few minutes or longer, depending on the amount of sediment in the tank.
- Close the drain valve by turning the handle clockwise.
- Turn the power back on to the water heater and refill the tank by opening the cold-water supply valve.
- Once the tank is full, turn on the hot water faucet nearest to the water heater to allow air to escape from the tank.
- Check for any leaks and make sure the drain valve is tightened securely.
It is recommended to flush your water heater at least once a year to remove sediment and improve the efficiency of the appliance. It is also recommended to have it serviced to maintain the warranty based on the manufacturer’s request. If you decide you would like professional help, you can
contact Perfection Plumbing to book an appointment!
For all the plumbing problems in your home, don’t hesitate to contact Perfection Plumbing for help.
JOB Heating & Air Conditioning Saskatoon is eager to provide the best possible customer experience. Their aim is to be a professional resource for our clients before, during, and after the sale! Their team takes pride in service knowledge of modern equipment and training. They are recognized by peers and offer sales, service, training & installations for residential, and commercial Heating, Cooling, and Plumbing systems in Saskatoon and area. In their latest article on water heaters, they share tips on how to reduce water heater energy bill expenses.
Water heaters account for nearly 20% of the average home energy bill. In fact, the only appliance that costs more to run than your water heater is your furnace. If you are looking to cut costs on your energy bill, water heaters are worth paying special attention to. Learn tips to reduce your water heater energy bill expenses from the experts at JOB Heating & Air Conditioning.
1. Insulate your hot water heater tank and pipes.
If you have a hot water heater tank, ensure it is insulated. Not only does tank insulation prevent heat loss, but it also lowers the risk of fire in the home. The same goes for your hot water heater pipes. If the pipes are not insulated, your water heater has to work harder to heat water. In order to conserve heat energy, it is recommended that you insulate a minimum of 6 feet of piping.
2. Lower the thermostat temperature on your hot water heater.
When your hot water heater comes from the manufacturer, chances are the thermostat will be set to 140 F (60 C). However, a thermostat setting of 120 F (48.88 C) is the hottest you should require. Having a lower thermostat temperature will reduce the risk of mineral buildup and will extend the overall life of your water heater.
3. If your hot water heater is older, be sure to add heat traps.
Heat traps are valves that trap heat energy that would otherwise be lost and can reduce your energy bill by up to $30 each month. Newer hot water heaters will come with heat traps already installed, so it is best to consider an upgraded unit rather than installing heat traps on your existing unit if your current hot water heater may be nearing the end of its life.
4. Use a timer on your hot water heater.
Traditional water heaters typically heat water all night long, which is very inefficient considering you do not use hot water at night. If you do not have a tankless water heater, installing a timer will give your water heater a rest and save you money.
5. Install low-flow faucets in your home.
Though this may seem like a bit of an investment, replacing your faucets with low-flow options can reduce annual hot water usage in your home by up to 60 percent. Installing low-flow faucets will ensure more money stays in your pocket.
6. Schedule maintenance service for your hot water heater.
Often, homeowners will maintain their own hot water heater tank, including draining and cleaning the unit themselves. This often leads to problems and ends up costing more money. It is best to let an experienced professional maintain your hot water heater.
Let the experts at JOB Heating & Air Conditioning ensure your water heater is not costing you more than it should. Schedule your maintenance service today.
JOB Heating & Air Conditioning is a Trusted Saskatoon plumbing company. We show up on time, deliver on budget and we leave the work area cleaner than when we arrived! At JOB we take pride in our plumbing services in this city and surrounding area, so nothing means more to us than testimonials from our clients as their preferred plumber in Saskatoon.
JOB products and services include:
‘Your Comfort is Our Concern!’