Trusted Tips and Resources

Trusted Tips & Resources

Trusted Saskatoon Furnace & Duct Cleaners at Bridge City Explain Air Duct Cleaning

Trusted Saskatoon Furnace & Duct Cleaners Bridge City Duct Cleaning provides both residential duct cleaning and commercial duct cleaning and furnace maintenance services. Their team is professionally trained, qualified, bonded, and factory furnace and duct cleaning technicians. In their latest article, they discuss how air duct cleaning is done. 

HOW AIR DUCT CLEANING IS DONE

You’ve seen the signs that your Air Ducts need cleaning, but now are you wondering how air duct cleaning is done? What do you need to be prepared for?

The Steps To How Air Duct Cleaning is Done

Step 1: Inspect The Air Ducts

A simple, visual inspection of the ducts leading to the return and supply registers is important for two reasons. First, it’s a step that you can take yourself to assess the level of buildup in the ducts beforehand and confirm the difference after they’ve been cleaned.

Second, a professional duct cleaning is an opportunity for Bridge City Duct Cleaning to check the ductwork for leaks or, in the case of flexible ducts, kinks. It is also a good time to repair and replace damaged ductwork.

Step 2: Create Negative Pressure

Bridge City Duct Cleaning uses large, portable or truck-mounted vacuum collection devices to suck dust and debris out of your ductwork. However, before turning on the suction and scrubbing the ducts, the technicians must perform preliminary steps.

  • First, they hook the vacuum collection device’s large hose to a duct close to the air handler—the heart of your HVAC system. The technician cuts an access hole in the duct, inserts the vacuum hose, and seals where they join as tightly as possible.
(Note that your HVAC system has a supply and a return side—ducts that send treated air into the rooms of the house, and ducts that return air to the air handler. The supply and return sides are separate, and the duct cleaning process is performed on each.)
    • Next, the technician will seal each register with an adhesive cover. This is an important step because even an extremely powerful vacuum collection device will not work if the registers in each room of the house are uncovered.
    • Once the technician finishes these steps, they turn on the vacuum unit. This step creates negative pressure, and particles inside the ductwork will be sucked into the collection device as they are brushed or blown loose.

    Step 3: Agitate The Dust

    Once the system is under negative pressure, the technician uncovers each register and cleans each duct. Technicians use rotating brushes, compressed air tools, and simple vacuum cleaners to ensure dust is dislodged and sucked into the vacuum collection device.

    Step 4: Clean The Rest Of The System

    It is recommended to clean the other components of the HVAC system as well, including the air handler’s blower motor, evaporator coil, and drain pan.

    Cleaning these components, along with cleaning or changing the filter, will improve the air quality in your home as well as extend the life and increase the efficiency of your HVAC system.

    A Bridge City Duct Cleaning technician will perform the job thoroughly and carefully, ensuring that your ductwork winds up clean and undamaged. A thorough cleaning should take three to five hours and this is how your air ducts are cleaned.  

    Call today to book your appointment with Bridge City Duct Cleaning.

     

    Trusted Saskatoon Air Conditioning & Furnace Pros at JOB Heating & Air Conditioning Explain How to Save on Your Gas Bill!

    JOB Heating & Air Conditioning Saskatoon is eager to provide the best possible customer experience. Their aim is to be a professional resource for our clients before, during, and after the sale! Their team takes pride in service knowledge of modern equipment and training. They are recognized by peers and offer sales, service, training & installations for residential, and commercial Heating, Cooling, and Plumbing systems in Saskatoon and areaJOB Heating & Air are Trusted Saskatoon Plumbers. In their latest tip, they share how you can save on your gas bill! 



    SAVE MONEY ON YOUR NATURAL GAS BILL


    Natural gas is an important part of Canada’s energy resources. More than six million Canadians use natural gas to light, heat and cool homes and businesses, to heat water, and for cooking.  Many Canadians have higher natural gas bills than they would like.


    Check for Aging Equipment

    If you are running an old, inefficient boiler or heating system, it may be wasting much of the energy it produces. It may never have had top-notch efficiency, to begin with, or it may have lost some capability with time and wear.

    Blocked Vents and Impeded Airflow

    The arrangement of the furniture and appliances in your home may block vents and restrict airflow. In this case, your natural gas heating system is likely working overtime because it’s much more difficult to heat your home to a comfortable temperature.

    Lower the Thermostat

    Especially in the winter, when gas bills soar, lowering the thermostat by even a couple of degrees can make a difference in your bill, helping you save as much as 5 to 10%. If lowering the heat would make your home uncomfortable in the evenings, try reducing the temperature only at night, or during the day if family members are at work. 

    Invest in a Smart Thermostat

    JOB Heating & air Conditioning recommend a smart thermostat for your home. A smart thermostat can adjust the heat to your particular schedule, so you won’t have to heat or cool your house even when no one’s home or everyone’s snuggled in bed. 

    Turn Down the Water Heater

    Some homes’ water heaters are set as high as 140 degrees, but most people don’t need their water that hot. To help save money on your gas bill, check your water heater and see if you can turn the temperature down while still allowing for comfortable showers and warm water for dishes.

    Keep Doors and Windows Closed During the Winter and Open During the Cool Summer Nights

    Along the same lines, keep doors and windows closed when your natural gas heating system runs. Opening windows and doors is great for cooling off a hot house on summer evenings, but it will let valuable heat escape in the colder seasons.

    Bundle Up

    Especially in the winter, wearing extra layers helps keep your thermostat settings low and your gas bills reasonable. If you’re wearing a sweater or some cozy flannel pants, you may not even notice that you’ve turned the thermostat down a few degrees. And using extra blankets or down comforters can help keep you warm at night when your thermostat is in its energy-saving mode.

    Natural Gas Check-Up

    Do a check-up on your plumbing, air conditioning and furnace. The check-up may show you how to save money on your Natural Gas Bill.



    JOB Heating & Air Conditioning offers 24/7 emergency service. Known for prompt and courteous service, they are ready to assist if your Saskatoon plumbing heating or cooling system needs repair or if you want to upgrade or update it. Their professional local team is happy to provide free estimates for any home comfort or plumbing improvements you have in mind.

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber 



    Signs Your Air Ducts Need Cleaning From Trusted Saskatoon Furnace & Duct Cleaners at Bridge City Duct Cleaning

    Trusted Saskatoon Furnace & Duct Cleaners Bridge City Duct Cleaning provides both residential duct cleaning and commercial duct cleaning and furnace maintenance services. Their team is professionally trained, qualified, bonded, and factory furnace and duct cleaning technicians. In their latest article, they discuss the signs your air ducts need cleaning. 

    5 SIGNS YOUR AIR DUCTS NEED CLEANING

    It is normal for the return registers to get dusty as dust-laden air is pulled through the grate. This does not indicate that your air ducts are contaminated with heavy deposits of dust or debris; the registers can be easily vacuumed or removed and cleaned; however, there are signs your air ducts need cleaning:

    Dust and Debris Are Blown During Start-Up

    One of the best ways to tell if your ducts need cleaning is to check how much dust and debris are blown out when starting your heating unit. In normal situations, air ducts do not release visible dust or debris when the heating and cooling system is switched on, and the air starts flowing through the ducts. Sometimes an accumulation of dust will make it seem like your ducts need to be cleaned, so be sure to perform this check only after a fresh filter has been installed. It’s important that your ducts be free of these substances as they can cause issues with energy efficiency and air quality throughout your home.

    Mould Growth

    The appearance of mould is never a good sign. It could mean a number of issues with your ducts (including a moisture problem). It’s important to check for mould for a variety of reasons, most prominently, to protect your health. Mould can cause breathing and other health-related problems. If you notice any mould in your ducts, call our duct cleaning service in Saskatoon immediately.


    You Notice Rodents or Insects

    Wildlife in your ducts is a big problem. If you notice any signs that there might be an infestation in your ducts, it’s definitely time to have your air ducts cleaned by a professional. Look out for small scratches, insect husks and shells along with rodent droppings. All could be signs that you have a couple of unwanted house guests living in your vents.

    The Presence of Carbon Monoxide

    This is only applicable if you use a gas stove, furnace or fireplace. Because your ducts are connected to each and every room in the house, it’s important to ensure that there’s no gas trapped inside them. This could lead to carbon monoxide poisoning. For this reason, it’s recommended that you have your heating system inspected at the beginning of every season.

    Unpleasant Odour from Ducts

    Another telltale sign of the presence of debris in the system and that you should conduct serious ventilation system cleaning is odour. If you experience an unpleasant smell in your home and can’t find the source, it could be emanating from the air duct system. You should get up close to all the air registers for a good sniff to verify these suspicions. You can also have a technician inspect the air ducts for anything that could be emitting a bad smell.

    Take a look at these 5 signs that your air ducts need cleaning, and if you find the signs, then let our professional team of experts at Bridge City Duct Cleaning take care of your dryer vent cleaning to prevent damage to your air and your home. 

    Let the professional team of experts at Bridge City Duct Cleaning take care of your spring duct cleaning to help optimize the air quality in your home! 

     

    Tips To save Money On Utilities From Trusted Saskatoon HVAC pros at JOB Heating & air Conditioning

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber renowned for their excellent reputation, JOB has been a leader in the Saskatoon HVAC industry since 1989. They provide air conditioning, furnace, and plumbing repair, sales, and service to residential and commercial clients in Saskatoon and the surrounding areas. Their team prides itself on being experts in water heating system technology, specializing in new in-floor and boiler installations throughout Saskatchewan.They  also maintain and repair existing hot water heating systems.  Prices are on the rise—fuel, groceries, and now utility bills. Homeowners in Saskatoon and the surrounding areas are all searching for ways to reduce their utility costs, in their latest article they share some tips on how to save energy and money.


    JOB Heating & Air Conditioning Money Saving Utility Tips 


    The good news is that there are numerous money-saving techniques available, ranging from simple changes in usage to the installation of new, efficient appliances. It's important to remember that every plumbing tactic aimed at saving money can make a difference.


    Lower Your Water Heaters Water Temperature


    There’s no doubt that a hot shower works wonders to soothe a person, especially after a long day of work or a night out in the cold. However, is a 140-degree bath significantly more relaxing than a 120-degree one? Most water heaters are set to 140 degrees by the manufacturer. This temperature setting ensures the water feels instantly warm and helps eliminate the risk of legionella bacteria. Lowering the water heater to 120 degrees, though, can save a homeowner up to 10 percent on energy costs and reduce the risk of scalding.

     

    Use Low-Flow Faucets


    We’ve all been preached about how much money goes literally down the drain when the water is left running while brushing teeth in the morning. Most of us have curbed that bad habit but we can make the morning and evening routine even more energy-friendly with the use of low flow faucets. These devices can reduce water usage by 20-50 percent a year by either mixing air within the water or lowering the output from around 2.2 gallons per minute down to 1.5.

     

    Use Flood Detectors


    For around $20, you can buy devices that can be attached to appliances like washing machines to detect leaks and overflows. These units can automatically shut off the appliance or the water supply, offering peace of mind when you start a load of laundry and leave the house. They can potentially save you thousands of dollars in damage if your washer overflows and water seeps into the drywall of the room below.

    Replace Or Repair a Leaky Toilet


    Another drain on your energy bills is a leaky toilet. A toilet that constantly drips or refills every 20 minutes can waste up to 7,000 gallons a month. Fixing a faulty flapper can cost as little as $3 and save you up to $840 a year. Replacing your toilet with a low-flow model can boost those savings to over $1,000 annually. 

    Get a Plumbing Inspection


    Have JOB Heating & Air Conditioning examine the plumbing throughout your home to identify any water loss (and money) through leaks, blockages, or other issues. By detecting and repairing leaks early, you can save money and reduce the risk of severe damage in the future. They will also ensure that shutoff valves and sump pumps are functioning properly in case of an emergency.


    JOB Heating & Air Conditioning offers 24/7 emergency service. Known for prompt and courteous service, they are ready to assist if your Saskatoon plumbing heating or cooling system needs repair or if you want to upgrade or update it. Their professional local team is happy to provide free estimates for any home comfort or plumbing improvements you have in mind.

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber 



    Made In the Shade Trusted Saskatoon Window & Blind Pro Compares Faux Wood vs Real Wood Blinds

    Made in The Shade Saskatoon offer their clients an amazing selection at an outstanding value... it is no wonder they have such happy clients. Let them help you with all of your Saskatoon Window Covering needs!

    Made In the Shade are your TRUSTED SASKATOON WINDOW COVERINGS EXPERTS.

    Faux Wood vs Real Wood Blinds

    One of the most commonly asked questions in our industry is: What is the difference between faux wood vs real wood blinds?  The best answer we can offer involves educating our clients on the features and benefits of both selections.

    Our horizontal faux wood blind collections give you the best of both worlds! They have the look of luxurious real wood blinds at a price of about 15 to 25% less. Because faux wood blinds are made from a synthetic material (usually PVC or a polymer), they also offer easy maintenance and care.

    You won’t have to worry about warping, cracking, or splitting in environments of high moisture or high humidity, making this an ideal product for bathrooms, kitchens, garages, kid’s play areas, etc. Available in solid vinyl, or in a composition of vinyl and wood for added strength, faux wood blinds provide superior insulation.

    Wood blinds, on the other hand, offer a warm and inviting look to any decor. Wood has long been associated with strength and aesthetic beauty.

    Both faux wood and real wood blinds come with a decorative valance at the top as a standard feature. Both are aesthetically pleasing choices to dress up your windows! It really comes down to personal preference and/or budget. With either selection, you can’t go wrong. After all, 2″ horizontal blinds continue to be the #1 choice in window coverings across North America for more than a decade.

    Richly stained or painted wood blinds offer a wider selection of colours than faux wood, as well as other upgraded options and features. We often recommend real wood blinds when our clients need to match a particular wood stain or a custom paint trim colour. Keep in mind that there is no comparison between faux stains and the rich beauty of a true wood stain, but we do carry wood grain-like options in our faux collections as well.

    Wood blinds are also an ideal choice for wider windows. Because of the lighter weight of real wood blinds, we can generally accommodate a wider window opening with a single-blind. This is always a preferred choice over two blinds in one window opening!

    You can order your wood blinds with the popular no-holes option to stop light from leaking into your rooms or opt for decorative fabric tapes. Some of their wood blind collections are available with a motorized or cordless option, for ease of operation and child safety. 

    Check out their listing here in Saskatoon Window Coverings to read what their happy clients had to say... Made In the Shade are your Trusted Saskatoon Window coverings experts.


    Categories

    Previous Posts

    ADDRESS

    S & E Trusted Online Directories Inc
    TrustedSaskatoon.com
    310 Wall St #209
    Saskatoon, SK   S7K 1N7
    Ph: 306.244.4150

    GET THE APP

    App Store Google Play
    Follow us on Facebook Instagram Linked In Twitter YouTube RSS Feed
    Abex
    Abex
    Stevies
    Sabex
    NEYA
    Website hosting by Insight Hosting