Maintaining your home comfort system, which includes your air conditioning, heating, and ventilation systems, is essential for ensuring optimal performance, energy efficiency, and longevity. Here are some tips to help you maintain your home comfort system:

1. Regular Filter Replacement: Check and replace your air filters regularly. Clogged or dirty filters restrict airflow, reduce system efficiency, and can lead to poor indoor air quality. Follow the manufacturer's guidelines for filter replacement frequency or clean reusable filters as recommended.

2. Professional System Inspections: Schedule annual maintenance inspections with a qualified HVAC technician. They can inspect and tune up your system, identify potential issues, clean coils, check refrigerant levels, and ensure proper system operation. Regular maintenance helps prevent breakdowns and keeps your system running efficiently.

3. Keep Outdoor Units Clear: Clear any debris, vegetation, or obstructions around your outdoor air conditioning unit or heat pump. Maintain at least two feet of clearance around the unit to ensure proper airflow and prevent airflow restrictions.

4. Check and Clean Condensate Drain: Regularly inspect and clean the condensate drain line to prevent clogs or blockages. A clogged drain can lead to water damage or system malfunctions.

5. Seal Ductwork: Inspect your ductwork for any leaks or gaps. Seal any leaks with duct sealant or mastic tape to improve energy efficiency and ensure proper airflow.

6. Keep Vents and Registers Clean: Regularly clean and remove any obstructions from vents and registers to maintain proper airflow and maximize system efficiency.

7. Programmable Thermostat: Use a programmable or smart thermostat to set temperature schedules based on your occupancy patterns. This helps optimize energy usage and comfort by adjusting temperatures when you are away or asleep.

8. Monitor Energy Usage: Keep an eye on your energy consumption. If you notice a significant increase in energy usage or if your system is not operating as efficiently as before, it may indicate a problem that requires attention from a professional technician.

9. Follow Manufacturer's Guidelines: Refer to the manufacturer's instructions for specific maintenance recommendations for your home comfort system. Different systems may have unique requirements, so it's important to follow their guidelines for optimal performance.

10. Stay Informed: Stay up-to-date with the latest industry information, best practices, and energy-saving tips. This can help you make informed decisions and take appropriate steps to maintain your home comfort system effectively.

Remember, if you are unsure or uncomfortable performing any maintenance tasks, it is always best to consult with our professional HVAC technicians at Razor. They have the expertise to ensure your system is properly maintained and operating at its best.

1. Regular filter replacement: Filters in HVAC systems should be checked regularly and replaced as needed. Clogged or dirty filters can restrict airflow and reduce system efficiency. Follow the manufacturer's guidelines for filter replacement frequency.

2. Cleaning of coils: The evaporator and condenser coils in HVAC systems can accumulate dust, dirt, and debris over time, affecting their efficiency. Regularly inspect and clean these coils using appropriate cleaning methods and products. Consider hiring a professional service for coil cleaning.

3. Cleaning of air ducts: Air ducts can accumulate dust, allergens, and contaminants. Periodic cleaning of air ducts helps maintain good indoor air quality and system efficiency. Professional duct cleaning services can use specialized equipment to thoroughly clean the ductwork.

4. Condensate drain maintenance: Condensate drains can become clogged with algae, debris, or sediment. Regularly inspect and clean the condensate drain lines to prevent blockages and potential water damage. If necessary, use a mild bleach solution to disinfect the drain lines.

5. Inspection and cleaning of fans and fan blades: Fans and fan blades can accumulate dirt and debris, affecting their performance. Inspect and clean the fans and fan blades regularly to maintain optimal airflow. Use appropriate cleaning methods and tools recommended by the manufacturer.

6. Maintenance of outdoor units: Outdoor units can be exposed to debris, leaves, and other obstructions. Regularly inspect and clean the outdoor units, removing any debris that may hinder airflow. Trim vegetation around the units to ensure proper airflow and access for maintenance.

7. Professional maintenance and cleaning: Consider hiring professional HVAC technicians to perform regular maintenance and cleaning of your commercial HVAC system. They have the expertise, tools, and knowledge to conduct thorough inspections, identify potential issues, and provide proper cleaning and maintenance.

8. Regular system inspections: Schedule regular inspections of your HVAC system to identify any issues or potential areas of concern. Early detection of problems can help prevent costly repairs and maintain system efficiency. Remember, proper cleaning and maintenance of your commercial HVAC system are crucial for optimal performance, energy efficiency, and good indoor air quality.

Following these tips and consulting with professionals can help ensure that your system operates effectively and provides a comfortable and healthy environment for occupants.

1. Assess the situation: Determine the extent of the construction or disaster cleanup and evaluate if your furnace ducts have been significantly impacted. If there was heavy dust, debris, or water damage, it's likely that cleaning will be necessary.

2. Hire a professional cleaning service: It's advisable to hire a professional furnace duct cleaning service with experience in post-construction and disaster cleanup. These experts have the knowledge, equipment, and techniques to effectively clean the ductwork and ensure it's free from contaminants.

3. Inspect the ductwork: The cleaning service will begin by inspecting the ductwork system to identify any areas that require special attention. They may use cameras or other tools to assess the condition of the ducts and determine the extent of the cleaning needed.

4. Cleaning process: The cleaning service will use specialized equipment to clean the furnace ducts thoroughly. This typically involves using high-powered vacuums, brushes, and air whips to dislodge and remove debris and dust buildup from the ducts. They may also use sanitizing agents to eliminate any lingering odors or microbial growth.

5. Register maintenance: After the cleaning process, it's important to implement regular maintenance to keep the ducts clean and functioning optimally. This includes replacing air filters regularly, keeping the HVAC system well-maintained, and scheduling periodic duct inspections and cleanings.

Remember, furnace duct cleaning is best done by professionals. At Breathe Better we have the necessary expertise and equipment to handle the job safely and effectively. We can help ensure that your ductwork is thoroughly cleaned, improving indoor air quality and promoting the efficient operation of your HVAC system.

Often when the hot water or furnace breaks down, it doesn’t seem to happen when our bank accounts are flush. It always seems to be at the worst of times.  

The financing for a new hot water/furnace at Gibbon Heating & Air Conditioning is completed through 3rd party company called FinanceIt.ca. Before starting the loan process you can review what your payments would look like based on their finance calculator. 

To start the application for the new hot water heater/furnace application – you will need the following information.

What are you looking to finance, your options are:

• Heating, Cooling & Water 
• Pool & Spa 
• Interior Improvements 
• Exterior Improvements 
• Retail

See more of Gibbons Air Conditioning Articles and Tips here.

When it comes to furnace maintenance, it’s important to consider the climate in which you live. With our Saskatchewan extremes of hot summers and cold winters, it’s crucial to have your furnace inspected, cleaned, and potentially replaced on a regular basis.

First and foremost, it is recommended that you have your furnace inspected annually by the professionals at Gibbon’s Heating & Air Conditioning. This will ensure that your furnace is in good working condition and that any potential issues are caught before they become a problem. During the inspection, a technician will check for things like leaks, cracks, and wear and tear, as well as perform routine maintenance, such as cleaning the air filter.

In addition to annual inspections, it’s also important to have your furnace cleaned on a regular basis. Dust, dirt, and other debris can accumulate in the furnace over time, causing it to work harder and less efficiently. A professional cleaning from Bridge City Duct Cleaning will help keep your furnace running smoothly and can even extend its lifespan.

If your furnace is more than 15 years old and it’s not working as efficiently as it used to, it may be time to consider a replacement. With new technology, furnaces are becoming more energy-efficient and can help you save money on your energy bills in the long run.

Overall, the frequency of furnace maintenance will depend on the age and condition of your furnace. It is important to have your furnace inspected and cleaned annually and if it is not working as efficiently as it should, it may be time to consider a replacement. By keeping up with regular maintenance, you can ensure that your furnace will keep you warm during the cold winter months and running efficiently all year round.

Have Gibbon Heating & Air Conditioning do a check-up on your plumbing, air conditioning and furnace today.  

See more of Gibbons Air Conditioning Articles and Tips here.